Your Okuma on stock!

8
Yes
None
1
1000000
Search...
/en/buy-your-okuma/

CNC MACHINES

We are pleased presenting you our stock of used CNC-Machines. We look forward to your interest and your inquiry!
Thumbnail
Filter
Sort By:

Categories:

"OKUMA LB2000EX-II-MY-C450"
"OKUMA LB2000EX-II-MY-C450" Image

Dear prospective customer,

we have an OKUMA LB2000EX-II-MY-C450 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP P300L (OSP-VPS) Virus protection system

Spindle-Hours:

Construction: 2017

 

Number Axis Achsen simultan: 3
Turning Dia over Slide: 470 mm
Turning Dia over Bed: 580 mm
Spindle-Reception: JIS A2-6″
Spindle-Bore: 62 mm
Turning Dia: 300 mm

Slide:
Z-Axis: 390 mm
X-Axis: 260 mm
Y-Axis: +/- 50 mm

Turret:
Positions Turret:1 12
Driven Tools Turret 16
C-Axis

Spindle-Rotation:
From 50 R/min up to 6000 R/min

Weight: ca. 4200 kg
Measurements:Length 2600 mm; Width 2000 mm; Heigth 2250 mm

Equipment:
Collet Chuck Reception
Hainbuch TOPlus Mini
Tailstock
C-Axis
Y-Axis

 

"OKUMA LB3000EX-II-MC-1000"
"OKUMA LB3000EX-II-MC-1000" Image

Dear prospective customer,

we have an OKUMA LB3000EX-II-MC-1000 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP P300L

Construction: 2015

Spindle-Hours: 2400 h

 

Turning Length: 1000 mm

X-Travel: 500mm

Turning-Dia. Max: 315 mm

Tailstock: Automatic and fully programmable

Turret: V12 Turret VDI 40

 

Equipment:

Tools: Driven Tools

Tool Sensor Marpos

Clamping Cylinder Big Bore Kitagawa

Extraction Sara UC2SD

Chip Conveyer and Coolant System

"OKUMA MA 600HB 10 APC"
"OKUMA MA 600HB 10 APC" Image

Dear prospective customer,

we have an OKUMA MA 600HB 10 APC in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP 200 M

Spindle-Hours: 14.898 h

Construction: 2009

 

Tool Holder : SK50

ATC 200 SK50

Spindel-Rotation : 12.000 RPM

37/26 kW

284 Nm

1 ° on the table

Pallets : 10 APC (630 x 630)

Linear scales in all axes X/Z

MOPTOOL

Adaptive control

Cooling : 7 step coolant through the spindle max 70 bar;

Chip Conveyer : Mayfran Concept 2000
8 extra M-codes

Programmable load station PPC

programmable tool station Auto tool measurement and tool Concept

2000 Swarf management

Renishaw probe for tools

Renishaw tool breakage detection

B-Achse 1 ° (No NC-B-Axis)

 

"OKUMA MULTUS B400-W"
"OKUMA MULTUS B400-W" Image

Dear prospective customer,

we have an OKUMA MULTUS B400-W in perfect condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

 

Control: OSP P 200 L

Spindle-Hours: 2650 h

Construction: 2007

– Circumference diameter over bed slide: 710 mm
Turning diameter max .: 710 mm

-Drive length: 1500 mm
– Travel X-axis: 690 mm

– Travel Z-axis: 1545 mm
– Travel W axis: 1550 mm
– Travel Y-axis: 230 + – 115 mm
– Travel C-axis: 360º travel B-axis: 225º
– Machine dimensions W x D x H: 4.9 x 2.6 x 2.9 m
– Machine weight: 15,500 kg
– Main spindle: – Drive power (20 min / cont.): 22/15 KW
– Speed range: 38 – 3,800 min -1 –
– Spindle nose JIS: A2-8 –
– spindle bore: 80 mm –
– Bearing diameter: 120 mm
– Counterspindle: – Drive power (20 min / cont.): 22/15 KW
– Speed range: 38-3,800 min -1 –
– Spindle nose JIS: A2-8 –
– spindle bore: 80 mm –
– Bearing diameter: 120 mm
– Milling spindle (B-axis): Swivel range: 210 º
– Indexing: 1º
– Drive power (3 min / 20 min / cont.): 11 / 7.5 / 5.5 KW
– Speed range up to: 10,000 min -1
– Tool holder: HSK-A63
– Feedrates X-axes: 30 m / min
– Feed rates Z-axes: 40 m / min
– Feeds W-axes: 40 m / min
– Feed Y-axes: 26 m / min
– Feed rates C-axes: 200 min-1

 

EQUIPMENT & ACCESSORIES

– MAIN SPINDLE WITH POWER PUNCH: SMW SPANNING CYLINDER FOR HOLLOW VOLTAGE DRILLING IN TUBE 70 MM SCHUNK ROTA-
THW PLUS – THREE-PACK POWERED CHUCK D: 260 MM BORE 81 MM, INCLUDING DIVERSE Baking jaws
– COUNTERSPINDLE AS W-AXIS WITH POWERED TORCH: SMW CLAMPING CYLINDER FOR HOLLOW VOLTAGE DRILLING IN THE TUBE 70 MM
HAINBUCH STANDARD SPANNDORN MANDO T212 GR. 3 D: 50-80 MM EQUIPMENT & ACCESSORIES (2)
– MILLING SPINDLE WITH INCREASED SPEED 10,000 RPM, 20/14 KW, SYSTEM HSK-A63 – AUTOMATIC TOOL CHANGE (ATC) WITH 40
STATIONS, WZG.-DIAMETER MAX. 90/130 MM, LENGTH MAX. 400 MM, WEIGHT MAX 10 KG
– INTERLIT HINGE BELT CONVEYOR WITH INTEGRATED COOLANT TANK
– INTERLIT HEAVY-DUTY BELT FILTRATION SYSTEM WITH REINFORCED TANK 900 L AND SUPPLY PUMP TH90 / 690 FSI,
– IFS FILTER SYSTEM IFM2000 MECHANICAL, SUCTION POWER 1900 M3 / H – IN-PROCESS-MESSEN (RENISHAW)
– WORKPIECE REFRIGERATOR, PROGRAMMABLE, WITH FINISHED CONTAINER
– INTERFACE FOR CONNECTING A LOAD MAGAZINE SOFTWARE (1)
– 2-stage clamping pressure for power clamping device
– Tool height correction in Y-axis for turning tools
– Extension kit „M“ OSP P200L (Kit One-Touch) IGF-M-D
– Tabular representation of data with EXCEL
– Helical interpolation also for thread milling
– DNC-T3 software for online monitoring with extended data transmission
– Software multifunction tool for the use of special tools
– Automatic zero offset Z axis, for main spindle and counterspindle
– Automatic zero offset C axis, for main spindle and counterspindle
– Additional measuring in Y-axis
– Package Toolholders HSK-A63
– Package of turning tool holders HSK-A63
– Three-jaw chuck D: 300 mm
– CE conformity

 

 

 

 

 

 

 

 

"OKUMA LT 2000 EX II MY TWINSTAR"
"OKUMA LT 2000 EX II MY TWINSTAR" Image

Dear prospective customer,

we have an OKUMA LT 2000 EX II MY TWINSTAR in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control:

Spindle-Hours:

Construction:

Performance:
Swing over Saddle: Ø 400 mm
Distanz between noses: 960 mm
Max turning dia.: Ø 210 mm
Max turning length: 130 mm

Travels:
X-Axis: XA, XB: 205 (+175 bis -30) mm
Z-Axis: ZA, ZB: 700, W: 730 mm
Y-Axis: YA: 95 (+50 / -45) YB: 95 (+45 / -50) mm
C-Axis: 360 (Inkremente 0,001)°

Spindle:
Speed: 50 – 6.000 [50 – 5.000 (nur linke Spindel / only left spindle)]
Speed ranges: 2 ( Wicklungsschaltung / motor coil swithcing ranges
Nose shape: ø 140 zyl. [JIS A2-6 (nur linke Spindel / only left spindle)]
Spindle-bore: ø 62/100 [ø 80/120 (nur linke Spindel / only left spindle)]

Turret:
Type: Multitasking V16 [V12]
No. of tools: 16 [12] (driven)
OD tool shank size: 20 / ø 32 mm
ID tool shank size:
45 – 6.000 min -1

Rapids:
X-Axis: 30 m/min
Z-Axis: 40 m/min
Y-Axis: 15 m/min
W-Axis: 32 m/min
C-Axis: 200 min -1

Motor:
Spindle L/R: 11,5/7,5 [22/15 (30/20)] (5 min/konst.) KW
Milling tool spindle: PREX 5,5/3,7 (7,5/5) (2 min/konst.) KW
X-Axis: XA: 3.5, XB: 2,8 KW
Z-Axis: ZA, ZB: 3,5 KW
Y-Axis: YsA: 3,5 KW
YsB: 3,0 KW

Coolant Pump: 0,8 x 3 KW
Size: 3.745 × 2.464 mm
Weight: 9300 Kg

EQUIPMENT

Spindle-cooling
Cooling-tank
Barring gear
compressed air
central lubrication with filling level control
Chip Conveyer
Bar feeder

"OKUMA MacTurn 550"
"OKUMA MacTurn 550" Image

Dear prospective customer,

we have an OKUMA MacTurn 550 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP E100-L

Spindle-Hours: 3943 h

Construction: 2005

 

40 Station-Tool Magazine BT-50

530mm dia & 400mm dia Chucks

SMW SLU 8 – 350mm Hyd Steady Rest,
Lower Turret,

Y Axis, C Axis, B Axis, Tailstock

Auto Doors, Chip Conveyer,

Max Machining Dia: 720mm

Max Machining Length: 3000 mm

Y axis Stroke: 250mm +125mm – 125mm

B axis: 0.1 grad°

C axis (Chuck): 0.001°

Spindle Motor: 37 / 30 kw

Spindle Speeds: 35 – 3500 rpm

Live Tool Spindle: 40 – 5000 rpm

Live Tool Spindle Motor: 22 / 15 kw

Auto Tool Changer: 50 Werkzeuge / 50 Tools, BT 50 Big Plus

Tailstock: Tow Along, 150mm dia x 250mm Stroke

Chuck: Kitagawa B 21

Max Tool Weight: 20 kgs

Dimensions: L 6150mm, W3073mm, H 3105mm

Machine Weight: 31,000 Kgs

 

"OKUMA MacTurn 350-W"
"OKUMA MacTurn 350-W" Image

Dear prospective customer,

we have an OKUMA MacTurn 350-W in perfect condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:
Control: OSP E100-L
Spindle-Hours: 3776 h
Construction: 2003

Turret and Tool Switcher: 44 Plätze

Tool-Holder: HSK63
Max Turning Dia: 350 mm
Max Turning Length: 1500 mm
Spindle-Travels: X/Y/Z/ 505 mm/190 mm/1670 mm
Main-Spindle: 3.800 min/-1
Performance: 22/15kW
Counter-Spindle: Rotation Max. 5.000 min/-1
Drive-Performance: 11/7kW

Milling-Spindle:
Rotation Speed max.: 12.000 U/min
Spindlemotor 11kW

 

Equipment:

Chip Conveyer

Prepared for Bar-Feeder

jetzt anfragen

 

"OKUMA LU 300-M"
"OKUMA LU 300-M" Image

Dear prospective customer,

we have an OKUMA LU 300-M in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP E100-L

Spindle-Hours:

Construction: 2005

 

– A-Turret with driven Tools

– Tailstock

– Turning Length: 1000 mm

– Automatic Door

Equipment:

– Coolant with high pressure and band-filter-system

– Touchsetter

– Oil-Extraction

 

 

"OKUMA LU-300MY-2SC-600"
"OKUMA LU-300MY-2SC-600" Image

Dear prospective customer,

we have an OKUMA LU-300MY-2SC-600 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

 

Control: OSP E-100L

Spindle-Hours: 14.740 h

Construction: 2004

 

first commissioning: 31.03.2005

A Turret NC V12 VDI40 ( All stations are driven )

B-Turret NC V8 VDI40

M-Spindle with Y-xis

C-Axis 360 °

Touch Setter for A und B Revolver

High Cut G Control

One Touch IGF Option

Tailstock manual but automatisch Schleppbar, no NC tailstock

Chip-Conveyer Mayfran and cooling station, Standard without high-pressure

turning dia: 370mm,

turning length: max 600mm

swing over bed: 400mm

Chuck Kittagawa B-210

 

 

 

 

 

"OKUMA GENOS L300 MY"
"OKUMA GENOS L300 MY" Image

Dear prospective customer,

we have an OKUMA GENOS L300 MY in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: OSP P300L-R

Spindle-Hours: 469 h !

Construction: 2014 – First Use 2016

 

Max Turning Length: 1000 mm

Max Swing:
over Bed: 520
over Slide: 300

Max Rotation-Speed: 3800 rpm

Equipment:
MY-Axis – V12 VDI Turret; all driven
Tailstock – Bar Feeder Interface
Parts removal
Marpos-Measurement-Sensor
Chip Conveyer & Coolant Tank

 

 

"MAZAK FH 10800"
"MAZAK FH 10800" Image

Dear prospective customer,

we have an MAZAK FH 10800 in very good condition for you on stock! Below you will find more technical information regarding this machine.
We look forward to your inquiry and remain with,

Best Regards

Your NEFF – The Okuma Specialists – Team

ᐳᐳᐳNeffokuma. comᐸᐸᐸ

 

Technical Details:

Control: MAZATROL 640M

Spindle-Hours: 15.000 h, new Spindle!

Construction: 2005

 

– EU/CE Maschine 2005

– 2 Pallets 1000 x 1000

– ATC 160 Tools SK50 – 15.000 RPM

– Full B-Axis 0.001 Degree

– Coolant:High Pressure Coolant trough Spindle

-Maximum Work Piece 2050 mm diameter

-Maximum Work Piece 1600mm Verfahrwege / Travels:

-X Travel 1700 mm

-y Travel 1400 mm

-z Travel 1525 mm Maschinen

-Machine size: 6100 mm x 8900mm

***SOLD*** OKUMA MU-400VA
***SOLD*** OKUMA MU-400VA Image

NEUWERTIGER ZUSTAND – WENIGER ALS 500 SPINDELSTUNDEN – OSP P 200 M

AUF LAGER / STANDORT BERGISCH GLADBACH

Sehr geehrter Kunde,
Die oben beschriebene Maschine haben wir für Sie auf Lager!
Sollten Sie eine OKUMA MU-400VA suchen kontaktieren Sie uns – wir freuen uns auf Ihre Anfrage

Ihr NEFF & neffbuy.com -The Okuma Specialists- Team

  • DATENBLATT / DATASHEET

    – 12.000 Umdrehungen

    – Hauptspindel 50 – 15.000 1/min

    – MAS BT 40; 22 KW / 199 Nm

    – 60 Werkzeuge

    – Renishaw Sensor

    – Metrol Sensor

    – Hochdruck Innenkühlung

    –  CAS Safety Anti Collision System

    – Super Nurbs

***SOLD*** OKUMA MA-400HA 6 APC BAUJAHR: 2014 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 M - 2502 SPINDELSTUNDEN
***SOLD*** OKUMA MA-400HA 6 APC BAUJAHR: 2014 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 M - 2502 SPINDELSTUNDEN Image
AUF LAGER /

Sehr geehrter Kunde,
Die oben beschriebene Maschine haben wir für Sie auf Lager!
Sollten Sie eine OKUMA MA-400HA 6 APC  suchen kontaktieren Sie uns – wir freuen uns auf Ihre Anfrage

Ihr NEFF & neffbuy.com -The Okuma Specialists- Team

  • DATENBLATT/ DATASHEET

    Datenblatt

    Verfahrwege:

    X- Achse :  560 mm

    Y- Achse :  610 mm

    Z- Achse : 625 mm

    B- Achse : 0.001 grad

    Spindel:   15000 UPM

    Spindel-Kegel :  BT 40

    Palettenanzahl :  6 Stück

    Spindel-Leistung :  22 /15 KW

    Werkzeug-Magazin :  100 Positionen

AUSSTATTUNG & ZUBEHÖR / SPECS. & OPTIONS

–  Späneförderer Mayfran Consep 2000

–  tool probe

–  Kühl-Tank

–  elektrisches Handrad

–  tool probe presetting

–  DNC-DT

Maschinen-Gewicht:    vorrausichtlich. 10.000 Kg

***SOLD*** - OKUMA LB 300-M BAUJAHR: 2007 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 L
***SOLD*** - OKUMA LB 300-M BAUJAHR: 2007 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 L Image
AUF LAGER / STANDORT Werlte

Sehr geehrter Kunde,
Die oben beschriebene Maschine haben wir für Sie auf Lager!
Sollten Sie eine OKUMA LB 300-M suchen kontaktieren Sie uns – wir freuen uns auf Ihre Anfrage

Ihr NEFF & neffbuy.com -The Okuma Specialists- Team

  • DATENBLATT/ DATASHEET

    Drehdruchmesser: 340 mm
    Spitzenweite: 1.000 mm
    – 4. steuerbare Achse
    – angetriebene Werkzeuge
    – Reistock
    – Späneförderer

    • AUSSTATTUNG & ZUBEHÖR /SPECS. & OPTIONS

      – einschl. normal-Zubehör

***SOLD*** OKUMA LB-300MY C-750
***SOLD*** OKUMA LB-300MY C-750 Image

***SOLD***

DATEN ZUR MASCHINE

Maschinentyp
OKUMA LB-300MY C-750
Hersteller: OKUMA
Modell: LB-300MY C-750
Baujahr: 2002
Zustand: sehr gut (gebraucht)

Betriebsstunden: 14000

BESCHREIBUNG

C-Achse
Ngur9
M (Milling live Tool)
VDI-30 Turret
Reitstock/Tailstock
Lynette(manuell) aber Abnehmbar
5000 U/Min
Späneförderer
Kühlmittelanlange
Türautomatik
Teilefänger

*** SOLD *** - OKUMA LB-300MY C-1000 U-100L
*** SOLD *** - OKUMA LB-300MY C-1000 U-100L Image

DATEN ZUR MASCHINE

Maschinentyp
OKUMA LB-300MY C-1000 U-100L
Hersteller: OKUMA
Modell: LB-300MY C-1000
Baujahr: 2002
Zustand: sehr gut (gebraucht)
Betriebsstunden: 14000

BESCHREIBUNG

LB-300MY C-1000
Zustand sehr gut!

U-100L Steuerung
Bdadwhdo2p
BAUJAHR 2002
Ca. 14.000 Spindelstunden

C-Achse
M (Milling live Tool)
VDI-30 Turret
Reitstock/Tailstock
Lynette(manuell) aber Abnehmbar
5000 U/Min
Späneförderer
Kühlmittelanlange

***SOLD*** Okuma MA600HB 2 APC
***SOLD*** Okuma MA600HB 2 APC Image

Werkzeugaufnahme : SK50
ATC 150 SK50
Spindelumdrehungen : 6.000 RPM (heavy)
37/26 kW
284 Nm
0,001 degree on the table
Pallets : 2 APC (630 x 630)
Linear scales in all axes X/Z
MOPTOOL

Adaptive control
Kühlsystem / Kühlung : 7 step coolant through the spindle max 70 bar; Mayfran Concept 2000
8 extra M-codes
Programmable load station PPC
programmable tool station Auto tool measurement and tool breakage Concept 2000 Swarf management
Renishaw probe for tools
Renishaw tool breakage detection
B-Achse 0,001 Grad (keine NC-B-Achse)

***SOLD*** - OKUMA LU 45M - OSP P200LA - TOP Condition
***SOLD*** - OKUMA LU 45M - OSP P200LA - TOP Condition Image

– Steuerung / Control: OSP P200LA

– Baujahr / Year of Construction: 2013

– Verfügbarkeit / Availabiltiy: Direkt Verfügbar/ directly available

– Standort / Location: Showroom Bergisch Gladbach!

– Spindelstunden / Spindle-Hours: 4500 Spindel-Stunden / 4500 Spindle-Hours Zustand Top!! //Spindle Hours

– Zustand / Condition: Top-Zustand / Top-Condition

– Werkzeuge / Tools: Reichhaltiges Werkzeug und Backen Packet inklusive, auch Angetriebene Werkzeuge eingeschlossen! / Plenty of Tools plus Jaw Package and driven Tools included

– Futter / Chuck: Rota NC

– Revolver / Turret: Doppelrevolver Maschine (A Turret V12/B-Turret V10 VDI50) / Double Turret Machine (A Turret V12/B-Turret V10 VDI50)

– Reitstock/Tailstock

– Drehlänge / Center Distance: 1000

– Touchsetter Marpos

– A Revolver mit Angetriebenen Werkzeugen/Driven Tools

"OKUMA LB2000EX-II-MY-C450" Image
"OKUMA LB2000EX-II-MY-C450"
Dear prospective customer, we have an OKUMA LB2000EX-II-MY-C450 in very good condition for you on stock! Below you will find more technical information regarding this machine.... Read More
"OKUMA LB3000EX-II-MC-1000" Image
"OKUMA LB3000EX-II-MC-1000"
Dear prospective customer, we have an OKUMA LB3000EX-II-MC-1000 in very good condition for you on stock! Below you will find more technical information regarding this machine.... Read More
"OKUMA MA 600HB 10 APC" Image
"OKUMA MA 600HB 10 APC"
Dear prospective customer, we have an OKUMA MA 600HB 10 APC in very good condition for you on stock! Below you will find more technical information regarding this machine. ... Read More
"OKUMA MULTUS B400-W" Image
"OKUMA MULTUS B400-W"
Dear prospective customer, we have an OKUMA MULTUS B400-W in perfect condition for you on stock! Below you will find more technical information regarding this machine. We look forward to your ... Read More
"OKUMA LT 2000 EX II MY TWINSTAR" Image
"OKUMA LT 2000 EX II MY TWINSTAR"
Dear prospective customer, we have an OKUMA LT 2000 EX II MY TWINSTAR in very good condition for you on stock! Below you will find more technical information regarding this machi... Read More
"OKUMA MacTurn 550" Image
"OKUMA MacTurn 550"
Dear prospective customer, we have an OKUMA MacTurn 550 in very good condition for you on stock! Below you will find more technical information regarding this machine. We l... Read More
"OKUMA MacTurn 350-W" Image
"OKUMA MacTurn 350-W"
Dear prospective customer, we have an OKUMA MacTurn 350-W in perfect condition for you on stock! Below you will find more technical information regardi... Read More
"OKUMA LU 300-M" Image
"OKUMA LU 300-M"
Dear prospective customer, we have an OKUMA LU 300-M in very good condition for you on stock! Below you will find more technical information regarding this machine. We look... Read More
"OKUMA LU-300MY-2SC-600" Image
"OKUMA LU-300MY-2SC-600"
Dear prospective customer, we have an OKUMA LU-300MY-2SC-600 in very good condition for you on stock! Below you will find more technical information regarding this machine.... Read More
"OKUMA GENOS L300 MY" Image
"OKUMA GENOS L300 MY"
Dear prospective customer, we have an OKUMA GENOS L300 MY in very good condition for you on stock! Below you will find more technical information regarding this machine. We... Read More
"MAZAK FH 10800" Image
"MAZAK FH 10800"
Dear prospective customer, we have an MAZAK FH 10800 in very good condition for you on stock! Below you will find more technical information regarding this machine. We look... Read More
***SOLD*** OKUMA MU-400VA Image
***SOLD*** OKUMA MU-400VA
NEUWERTIGER ZUSTAND – WENIGER ALS 500 SPINDELSTUNDEN – OSP P 200 M AUF LAGER / STANDORT BERGISCH GLADBACH ... Read More
***SOLD*** OKUMA MA-400HA 6 APC BAUJAHR: 2014 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 M - 2502 SPINDELSTUNDEN Image
***SOLD*** OKUMA MA-400HA 6 APC BAUJAHR: 2014 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 M - 2502 SPINDELSTUNDEN
AUF LAGER / Sehr geehrter Kunde, Die oben beschriebene Maschine haben wir für Sie auf Lager! Sollten Sie eine OKUMA MA-400HA 6 APC  suchen kontaktieren... Read More
***SOLD*** - OKUMA LB 300-M BAUJAHR: 2007 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 L Image
***SOLD*** - OKUMA LB 300-M BAUJAHR: 2007 - SEHR GEPFLEGTER ZUSTAND - OSP P 200 L
AUF LAGER / STANDORT Werlte Sehr geehrter Kunde, Die oben beschriebene Maschine haben wir für Sie auf Lager! Sollten Sie eine OKUMA LB 300-M suchen kont... Read More
***SOLD*** OKUMA LB-300MY C-750 Image
***SOLD*** OKUMA LB-300MY C-750
***SOLD*** DATEN ZUR MASCHINE Maschinentyp OKUMA LB-300MY C-750 Hersteller: ... Read More
*** SOLD *** - OKUMA LB-300MY C-1000 U-100L Image
*** SOLD *** - OKUMA LB-300MY C-1000 U-100L
DATEN ZUR MASCHINE Maschinentyp OKUMA LB-300MY C-1000 U-100L Hersteller: OKUMA ... Read More
***SOLD*** Okuma MA600HB 2 APC Image
***SOLD*** Okuma MA600HB 2 APC
Werkzeugaufnahme : SK50 ATC 150 SK50 Spindelumdrehungen : 6.000 RPM (heavy) 37/26 kW 284 Nm 0,001 degree on the table Pallets : 2 APC (630 x 630) Linear scales in all axes X/Z MOPTOOL ... Read More
***SOLD*** - OKUMA LU 45M - OSP P200LA - TOP Condition Image
***SOLD*** - OKUMA LU 45M - OSP P200LA - TOP Condition
– Steuerung / Control: OSP P200LA – Baujahr / Year of Construction: 2013 – Verfügbarkeit / Availabiltiy: Direkt Verfügbar/ directly available – Standort / Location: Showroom Bergisch Gladbach! – Sp... Read More


Are you looking for a OKUMA machine? - Then we are your partner!
We do have a large selection of OKUMA machines on stock - We can provide you every kind of machine - Lathe; Milling; Machining Center .
All machines are technically checked by our technicians and can be visited under power at our facility

With our big experience we can fully consult you.

Your NEFF - The Okuma Specialists & neffbuy.com Team

Contact

NEFF - The Okuma Specialists &
neffbuy.com Onlineshop

Social

Impressum/Datenschutz/Quellen

AGB / Terms and Conditions: Firma Neff - The Okuma Specialist

neffokuma.com on facebook

Unable to display Facebook posts.
Show error

Error: Error validating access token: The session has been invalidated because the user changed their password or Facebook has changed the session for security reasons.
Type: OAuthException
Code: 190
Subcode: 460
Please refer to our Error Message Reference.

× How can I help you?
WhatsApp WhatsApp Neffokuma.com